落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高直流电压电压小直流电压疲劳试验报告仪(耐脉冲疲劳试验报告仪)-(测算机有效控制)

High voltage low current tester (arc resistance tester) - (computer control)

软件名称大全:耐电弧试验机

Product name: electric arc resistance tester

新产品机型:NDH-A

Product model: NDH - A

满足需要规格:GB/T 1411-2002《混合物绝缘性村料耐高低平瞬时电流弧光蓄电池充电的耐压》(符合IEC  61621-1997)及ASTM D495等细则的的标准设计创造的,并达到IEC 149、UL 746A等现场实验手段

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

包括适用于比率及功能表:

本应力測試机是遵循应用软件于主轴电机、电嚣和水取暖器电嚣等行业领域的电工维修用橡胶、硅胶粘合剂胶和隔绝漆等隔绝资料的耐弧光耐热性指标评估,主中用粉状隔绝资料如:橡胶、bopp薄膜、硅胶粘合剂、白云母、工业陶瓷、玻璃板、隔绝油、隔绝漆、纸壳等物料的耐弧光耐热性指标測試;

本疲劳测试仪由计算的机调控进行,不错显视现如今科学试验报告心态及科学试验报告日期,科学试验报告结束之后并储存现如今科学试验报告数据表格,并可打印纸.基准實驗申请书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为前后左右立体式结构设计,顶部为操作的系统化,顶部为现场实验箱。

2 本产品的选用*新智慧管理高技术,根据采用程序代码(IEC或ASTM)可半自动参与测试,并在笔记本电脑软件屏幕上显示可靠性试验具体步骤和导致。

3 **效率好的,抗干拢效率强,检测精准程度高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断时数据误差:超过 ±10ms

2 调压器数量:2kVA

3 电机额定功率试验报告端电压:12.5kV

4 校正电压降控制精度:±3%

5 瞬时电流把握误差:±10%  电压电流自动测量准确度:1.5%

6 电极材料对试件材料负担:(0.5±0.05)N

7 参比电极建材:钨棒

8 电极材料长度:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 利用区域环境温差:(23±2)℃

10 采用环保空气湿度:(50±5)%

11 交流电源:220V±5%  50Hz  10A

12 校正    方式 :   国际标准/美标/10 mA 连着/20 mA 陆续/30 mA重复/40 mA联续

13 做实验的时候环节内容如下:

应用程序段

弧光电流量

mA

电孤通断的时间s

各源程序段将持续耗时s

检测总耗时s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

间隔通

60

240

5

20

间隔通

60

300

6

30

维持通

60

360

7

40

维持通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

顺序号

称呼

次数

自己的名字

01

耐焊弧测试仪器仪

单台

 

02

参比电极系统

五套

 

03

参比电极橡胶支座

一台

 

04

开关电源低压电缆

每套

 

05

接地保护放**

一部

 

06

工作电流毫安表

一辆

 

07

电脑主机测控APP

几套

 

08

岩样架

一个

 

09

电级距标准块

2块

 

10

弧度标准单位块

2块

 

11

瓷器片

2片

 

12

喷墨印刷机

1台

牌子

13

估算机

1台

项目

14

施用讲解书

1份

 

15

合适证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 品牌型号规格:

NDH-A    耐电孤耐压仪-微机有效控制

NDH-B    耐脉冲耐压仪-触模屏设定

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪